𝙃𝙞 𝙜𝙪𝙮𝙨! 𝙇𝙚𝙩 𝙢𝙚 𝙞𝙣𝙩𝙧𝙤𝙙𝙪𝙘𝙚 𝙢𝙮𝙨𝙚𝙡𝙛, 𝙄 𝙖𝙢 𝙢𝙞𝙡𝙠𝙮 𝙄 𝙬𝙞𝙡𝙡 𝙗𝙚 𝙮𝙤𝙪𝙧 𝙜𝙪𝙞𝙙𝙚 𝙩𝙤 𝙡𝙚𝙖𝙧𝙣 𝙉𝙎𝙁𝙒 𝘼𝙧𝙩 !!
𝙄𝙣 𝙤𝙪𝙧 𝙛𝙞𝙧𝙨𝙩 𝙢𝙚𝙚𝙩𝙞𝙣𝙜, 𝙬𝙚 𝙬𝙞𝙡𝙡 𝙡𝙚𝙖𝙧𝙣 𝙩𝙝𝙚 𝙖𝙧𝙩 𝙤𝙛 𝙥𝙚𝙣𝙞𝙨𝙚𝙨, 𝙖𝙣𝙙 𝙝𝙤𝙬 𝙩𝙤 𝙝𝙖𝙣𝙙𝙡𝙚 𝙩𝙝𝙚 𝙥𝙚𝙧𝙨𝙥𝙚𝙘𝙩𝙞𝙫𝙚 𝙤𝙛 𝙢𝙤𝙫𝙚𝙢𝙚𝙣𝙩.

First we will learn how the anatomy of a penis works, it can be divided into 4 parts.

• A.-The point of attachment to the skin
• B. The part of the curvature that is due to the weight of the genitals when they are erect and the tension they produce.
• C.- Foreskin or Prepuce.
• D.- The glans.
• E.- Scrotum.
• F.- Conduit of the urethra
  

Let's talk a bit about our friend's Dream before we get into the topic about the erection.

When the penis is asleep they can be seen in two ways.

• A. When flaccid, the penis shrinks because of the little blood flow, and being erect doubles or triples its size.

• B. Even when flaccid, the penis retains its size and when it is erect it only rises.

When the penis is flaccid the skin of the prepuce can be seen in different ways, or in the case of a circumcised penis it is not observed.

The first part that we will see about how to draw testicles is the weight they generate and how they can affect the elasticity of the skin.

In this example we can see how the skin stretches over time and the point of tension exerted by the scrotum to the skin, however if exposed to cold water or ice, the skin tightens and shrinks until it looks like the first example.

Since it is a part of the body that is not fully adhered, rather it dangles from the pelvis, gravity and pose will be an important part of a more natural visualization, to guide us better we have to visualize a small oval triangle between the scrotum and the anus.

But how to draw it correctly?

First we must make an oval divided in half, since sometimes the scrotum separates and this division is very noticeable, then we should only make a guide of the point of attachment to the skin.

Something quite simple to draw and easy to modify for some sudden or strange movement or pose.

Already knowing how the scrotum is located we will learn what is the correct position of the trunk.

This image shows where to place the support point correctly.

And then we would place several circles that will help us to place the trunk, to finish drawing the cylinder that will help us trace the penis correctly.

𝘽𝙪𝙩 𝙝𝙚𝙧𝙚 𝙬𝙚 𝙢𝙪𝙨𝙩 𝙢𝙖𝙠𝙚 𝙖 𝙬𝙖𝙧𝙣𝙞𝙣𝙜 𝙖𝙣𝙙 𝙞𝙨 𝙩𝙝𝙖𝙩 𝙣𝙤𝙩 𝙖𝙡𝙡 𝙩𝙧𝙪𝙣𝙠𝙨 𝙖𝙧𝙚 𝙩𝙝𝙚 𝙨𝙖𝙢𝙚.
𝙏𝙝𝙚𝙧𝙚 𝙞𝙨 𝙜𝙧𝙚𝙖𝙩 𝙫𝙖𝙧𝙞𝙚𝙩𝙮; 𝙇𝙤𝙣𝙜, 𝙬𝙞𝙙𝙚, 𝙡𝙤𝙥𝙨𝙞𝙙𝙚𝙙, 𝙨𝙢𝙖𝙡𝙡, 𝙡𝙖𝙧𝙜𝙚, 𝙚𝙩𝙘.

Although you draw the cylinder you will have to vary it a bit, remember that the one face symdrome is something very criticized in the illustration industry, so do not make the same thing down there.

And we reach the last point of our friend, to draw a glans we must make a circle and an elongated oval that will be the base of the glans.

But to draw from the bottom perspective, it's like making an apple face down following the steps shown in the image.

𝙉𝙤𝙬 𝙝𝙖𝙫𝙞𝙣𝙜 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙗𝙖𝙨𝙚𝙨 𝙤𝙛 𝙝𝙤𝙬 𝙩𝙤 𝙞𝙡𝙡𝙪𝙨𝙩𝙧𝙖𝙩𝙚 𝙖 𝙥𝙚𝙣𝙞𝙨, 𝙬𝙚 𝙘𝙖𝙣 𝙡𝙚𝙖𝙧𝙣 𝙨𝙤𝙢𝙚 𝙩𝙧𝙞𝙘𝙠𝙨 𝙤𝙛 𝙙𝙞𝙜𝙞𝙩𝙖𝙡 𝙘𝙤𝙡𝙤𝙧.

• The first step is to clean our sketch, and make a smooth line in one layer.

• Then in a new layer we grab a base color and fill in the area.

• In this step we must block the layer to be able to modify it without leaving the color that we had placed, and we will use the gradient tool, to darken the areas of the testicles and the glans a little. In this case only use a dark blue.

• And to make the shadow, we will create a new layer, with the multiply style, and with a pale color we will make the shadow, thanks to the effect of the layer. We can also darken some areas a little more to enhance the three-dimensionality.

• And if we only want to color it without any extra effect, we go to the illumination part, where we will use three shades that would be blurred as seen in the example.

The tone is almost not appreciated since it has the dimmest light and it is very blurred, then the other type of shadow comes where it remains tenuous and denotes much more, and the last thing would be the strong shine caused by sweat or the natural fat of the skin.

But, what if I want to make the effect of water or humidity?

• For this we will take a stronger tone of the color we use and we will place that color in the area where we want it to look wet, and at the base we will gently diffuse with the finger tool.

If the effect is very strong or we do not like it, we can lower the opacity of the layer to our liking.

𝘼𝙣𝙙 𝙩𝙝𝙞𝙨 𝙞𝙨 𝙖𝙡𝙡 𝙛𝙤𝙧 𝙩𝙤𝙙𝙖𝙮 𝙜𝙪𝙮𝙨, 𝙝𝙤𝙥𝙚𝙛𝙪𝙡𝙡𝙮 𝙩𝙝𝙚 𝙜𝙪𝙞𝙙𝙚 𝙬𝙞𝙡𝙡 𝙗𝙚 𝙤𝙛 𝙝𝙚𝙡𝙥, 𝙄𝙛 𝙮𝙤𝙪 𝙬𝙖𝙣𝙩 𝙖𝙣𝙮 𝙖𝙙𝙫𝙞𝙘𝙚 𝙤𝙧 𝙝𝙖𝙫𝙚 𝙖 𝙙𝙤𝙪𝙗𝙩 𝙙𝙤 𝙣𝙤𝙩 𝙗𝙚 𝙖𝙛𝙧𝙖𝙞𝙙 𝙩𝙤 𝙘𝙤𝙢𝙢𝙚𝙣𝙩 𝙤𝙣 𝙩𝙝𝙞𝙨 𝙥𝙤𝙨𝙩.

Remember that sex is not a TABU and you are free to draw what you want, with this guide you will learn things that many are afraid to teach or just practice, see you in the next post!

Click here to see other posts: