ArcticCoin Master node Setup - earn passive income

in #arcticcoin4 years ago

As you know Arctic Coin is current growing at quite high rate ..theyer market cap also increasing .

$0.200014 (90.83%)

Market Cap = $4,778,720 - 1,734 BTC
Volume (24h) = $389,105 -141.23 BTC
Circulating Supply = 23,891,926 ARC



So as per this situation i can say this is best time to start you own ArcticCoin master node and make huge passive income as this coin is increasing day by day ....

So here is guide how to start you own ArcticCoin master node in Windows PC or vps


To start, you must create a transaction Goldmine 1000 ARC in one lump sum to zero wallet.

It is necessary to have a dedicated external IP-address.

The firewall port 7209 must be open (or whatever you use to connect Goldmine).

If you are using a router, the router must be configured port forwarding 7209 to the inside network for external connections.

Devices running the Goldmine must be constantly turned on and have constant access to the Internet (permissible disconnection from the network no more than 1 hour). For the smooth operation of Goldmine it is recommended to use an external device, such as a family Raspbery Pi, Banana Pro and similar devices.

Download version as per your pc :-

Where toy buy ArcticCoin ??

This 2 exchange is best right now


Step 1. Create an address of zero wallet

Run wallet Arctic Core on your computer.

In the top menu select "Tools" - "Debug Console"

At the command prompt, enter the console command:

getnewaddress 0

Get the address of zero wallet


Step 2. Create a transaction on 1000 ARC

At the command prompt, enter the console command


AMAUKXXXXXXXXXXXXXXXXXXXXXXXb9y2AK - address the new wallet that was created in Step 1.

Get the transaction number


Step 3. Generate a private key

Now we need to create goldmineprivkey

To do this, enter the command line console

goldmine genkey

Get the private key


Step 4. Edit the configuration file arcticcoin.conf

In the top menu select "Tools" - "Open the configuration file"

Or, go to the folder in which you installed the wallet and open arcticcoin.conf file, for example, using Notepad.
Default folder with a wallet found at C:\Users\user_name\AppData\Roaming\Arctic

The file records the arcticcoin.conf


6vzaXXXXXXXXXXXXXXXXXXXXXXXXXXXXB7USLp - This private key obtained in Step 3.
externalip= - specify your external ip-address

Step 5. Edit the configuration file goldmine.conf

First we need to know output index of the transaction, which we sent 1000 ARC

At the command prompt, enter the console command

goldmine outputs

Come out

The figure at the end of the line - that is output index, we need

Next, go to the folder in which you installed the wallet, and open the file goldmine.conf

In this file, make a record


gm1 - the serial number of your Goldmine, if you run a few Goldmine, the following can be gm2, gm3 etc. - external ip-address of your computer on which you run Goldmine
6vzaXXXXXXXXXXXXXXXXXXXXXXXXXXXXB7USLp - This private key obtained in Step 3
18c68a3883XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXb58fc3918b6e4 - This transaction number obtained in Step 2
0 - output index, which we learned earlier in this step

Save the file and close the wallet.

Step 6. Check the connection and run Goldmine

In the section "Transactions", on the contrary of the transaction, which was sent in 1000 ARC in Step 2, put things on the icon.


We wait 15 confirm.
Note that the icon "check mark" in the transactions wallet comes with 6 confirmations, but in order to run Goldmine must wait 15 confirmations

At the command prompt, enter the console command

goldmine start-all

We get the following message


If the received message in the status triggered Goldmine - "result" : "successful", then everything is fine - the launch was successful Goldmine.
As soon as a transaction in which we sent to the 1000 ARC zero wallet confirmed - in the section "Transactions" in front of this transaction clock icon will change to the icon "check", launched Goldmine ARC start producing coins, and transactions, you will see the number of coins produced.


If the received message in the status triggered Goldmine - "result" : "failed", an error occurred while launching Goldmine.
Go through all the steps again and start the Goldmine.

IMPORTANT! If you turn off your computer or you will not have an internet connection more than 1 hour, then turn off your Goldmine.

About an hour after entering the "goldmine start-all" command, you can test the functionality of running Goldmine, entering the following command in the console:

goldmine list-conf

If "status": "ENABLED", the Goldmine node running.


If "status": "MISSING", the node is taken off and you need to check the settings Goldmine node and check whether all the starting conditions are met Goldmine node (external ip-address, open port 7209).


All set up now start generating income every day ..

Happy earning ........................


really thats great

Congratulations @bapparabi! You have received a personal award!

2 Years on Steemit
Click on the badge to view your Board of Honor.

Do you like SteemitBoard's project? Then Vote for its witness and get one more award!

Great stuff ,thank you!

Congratulations @bapparabi! You received a personal award!

Happy Birthday! - You are on the Steem blockchain for 3 years!

You can view your badges on your Steem Board and compare to others on the Steem Ranking

Vote for @Steemitboard as a witness to get one more award and increased upvotes!