dpa-punch (50)in #airsoft • 10 months agoThe CHC-10: Fallout New Vegas 10mm brought into the real world through airsoft.We decided to make this prop a few years after beating the game, and we had a plan to do it! Early on in the game once…dpa-punch (50)in #guns • 3 years agoBack With Some Real-Steel!So with all the projects we’ve worked on involving airsoft we switched it up a bit and delved a little into some more…dpa-punch (50)in #airsoft • 4 years agoMulti-use, Multipurpose!We Originally designed the MPF handguard for a Umarex HK MP5A4, but we found that with some edits to the design it…dpa-punch (50)in #airsoft • 4 years agoStart Of Yet Another Project: A Peak At Project Fighter Chances are you’ve seen the basic MP5 design and layout, and probably to a lesser degree you’ve seen the…dpa-punch (50)in #partiko • 5 years agoLast Game of the 2010s Was a Blast!Some new people joined in for the fun as well as many teammates. It was an all day event, so we played from the day…dpa-punch (50)in #dtube • 5 years agoSpare Parts Gun Part 1Hello there! This is first video of a new project we started based around a spare parts V.3 gearbox build. Keep in…dpa-punch (50)in #partiko • 5 years agoIs The Future Now, Or Later? A Project Called C360We’re working on a new conversion using our G36 GBB as a base model. It’s futuristic in concept, but we’ve only…dpa-punch (50)in #partiko • 5 years agoStill Need To Hammer Out Some Minor DetailsWe successfully 3-D printed some more gas blowback rifle parts, and this time they were more necessary parts to make a…dpa-punch (50)in #dtube • 5 years agoOur MSK lives! 3-D printed parts may have possibly saved its life!In this one Punch talks about the team’s WE-Tech MSK, and how it went from a project gun to a working gun with the use…dpa-punch (50)in #airsoft • 5 years agoGet Rail’d!Not too long ago we got our three letter logo designed in CAD, and we’ll be putting it on nearly everything that we…dpa-punch (50)in #airsoft • 5 years agoAn Experiment Goes Right! So we were thinking about doing a counterclockwise thread for the C-12 project for a while but wasn’t sure about the…dpa-punch (50)in #dtube • 5 years agoTimelapse 3-D Print- First perfected part of Project SwarmJust a quick look at how the printer works without having to sit for over an hour and watch plastic grow. Enjoy! ▶️ DTube ▶️ YouTubedpa-punch (50)in #dtube • 5 years agoProject Rare: Forgotten AirsoftWe describe a bit about what Project Rare is, how it started, plus what we plan to do with it. ▶️ DTube ▶️ YouTubedpa-punch (50)in #partiko • 5 years agoOEM: Someone’s Compensating For SomethingWe’ve been working on this project for a bit, but haven’t really showed anything about it until now. We wanted to add…dpa-punch (50)in #steem • 5 years agoPins And NeedlesMost modern firearm replicas/airsoft models are made to have a tool-less disassembly. This leads to a reliance on pins…dpa-punch (50)in #gaming • 5 years agoFirst DPA M4 Magazine Prototype We’re trying a bunch of new things and mags were next on the list. This test prototype was to check fitment on various…dpa-punch (50)in #steem • 5 years agodpa-punch's IG on 2019/07/081st barrel extension print was a success! #steem #gaming #guns #airsoft #team #dpacustom #suppressor…dpa-punch (50)in #gaming • 5 years agoPunch’s Marvelous Adventures In 3-D LandI’ve been wanting to get into 3-D printing for a long time now, and I’m glad that I finally did. There’s a lot to…dpa-punch resteemedakilie1029 (57)in #palnet • 5 years agoGET FREE UPVOTES!!!Hello there everyone, what you've read in the title of this article is TRUE, I'm indeed offering FREE UPVOTES.…dpa-punch (50)in #steem • 5 years agodpa-punch's IG on 2019/07/06Progress 😎 #steem #gaming #guns #airsoft #team #dpacustom #deathpunchairsoft #customairsoft #az #usa #pewpewpew…
