DIY Ghettoblaster

This is my ghettoblaster project from 2010. It's made of plywood covered in glossy acryl. Inspiration for looks came from KITT and all 80s' aesthetics :D I can add sort of parts list later if anyone is interested building their own. Posted earlier on my imgur flickr and allthemods.
http://imgur.com/user/drakmin/submitted
https://www.flickr.com/drakmin
http://allthemods.com/userinfo.php?userid=25&album=0

Finished ghettoblaster with led scanner running

Glossy acryl

Main technical parts are d-class amp and high efficiency drivers. D-class amps dont generate much heat and electricity is used in good efficiency which is important on battery operated unit. Even more important are high sensitivity speaker drivers which require only couple of watts to be loud. This ghettoblaster has Visaton BG20 drivers which, on paper, produce 92 decibels with 1 watt. Battery is 6s lipo with 5000mAh.

Sketching the size, horn tweeter in the middle. These drivers need ~20liter sealed enclosure

Building in the garage with basic tools and stiff, light but cheap plywood

Basic shape finished, notice my rendered sketches on the papers

Low tech shaping method :)

Gluing

Handle from aluminum

*Electronics installed. Note this is a full mono 2-way design. Two 8" bass/middle drivers and horn tweeter in the middle. Upper round holes will be used for battery and fuse.

Amp and crossover

Laser cut acryl parts to cover plywood

Acryl glued

Protective stickers removed :D