Learn with steem|| How to cut and sew pieces gown by @esthyfashion 25% payout to @null

in Steem4Nigeria4 months ago

IMG_20211001_173606_1.jpg

Good evening everyone welcome to my another tutoria, today I will be showing you on how to cut and sew a beautiful flowing gown I know most of you have challenges in this , let get started.

Measurement

shoulder16
shoulder bust10
under bust waist14
half length16
half length waist36
bust40
hips45
gown length60
selves16
round selves17

This is the material
IMG_20210927_104024_1.jpg

I folded the material into two , mark the hip point mark the knee length and mark the waist, then I took the waist measurement at were I mark waist line, the waist measurement is 36 so I mark 36 inchies and put 2 inches allowance for sewing , then I took the hip measurement, the hip measurement is 45 inchies so I mark 45 inchies and put 2 inchies allowance then I connect it to the knee and I also connect the waist to the hip and it gives me a shape

IMG_20210927_111904_8.jpg

Then I cut it out
IMG_20210927_112124_9.jpg
The next thing is to cut the back I folded the material into two then i places the front on top of the material then mark the zip allowance 2 inchies and then I mark 6 inchies for trail then I connect it to the waist

IMG_20210927_113240_9.jpg

The next thing is to cut the upper side, I folded the material into two then mark the bust point, mark the under bust and half length then I took the bust measurement at were I mark the bust point , the bust measurement is 40 inchies so i mark 40 inchies and put 2 inches allowance which makes it 42 then I move to under bust, the under bust measurement is 36 so i mark 36 inchies and add 2 inches allowance which makes it 38 then I connect it together and cut it out

the begins

I join the back together then places the front on top of the back then I shape it in her measurement then sew 4 inches for dart after that I sew the front side, I first join the bust point and the under after that I used a linning to turn it so that it will be neat and I do the same thing at the back , this is how it looks like

IMG_20210930_110335_7.jpg

Then after I join it to the down part, the next thing is to cut the selves, I folded the material into two then mark 14 inches then I draw a curve shape
IMG_20210930_110927_1.jpg

The next thing is to sew a loose stitches after that I use the lease and design it in the tip , then I fixed it in the dress , this is the finish result
IMG_20211001_173606_1.jpg

IMG_20211001_173614_4.jpg

conclusion

Please if you have any questions please kindly drop your question in the comments section I will be glad to see your question there, and in my next tutorial I will be showing you how to cut and sew jumpsuit, thank you all for spending time and go through my post

Sort:  
 4 months ago 

Hello dear thanks for sharing this tutorial with us here, the dress is very nice 👍 likewise the designs. Continue to be active in our community we appreciate your effort.

REMARKS;

Plagiarism-free
#steemexclusive
#club5050
Delegation
Bot-free
BENEFICIARY to @null

Coin Marketplace

STEEM 0.23
TRX 0.06
JST 0.025
BTC 20171.61
ETH 1355.14
USDT 1.00
SBD 2.49