The Mystery Of The Sarabium ....The Temple of Secrets

The Sarbium Temple in Saqqara has 26 large coffins made of granite, The coffin cover weighs 30 tons, The body of the coffin itself is 70 tons, This means that they need about 500 men to move each box of them
Why did these coffins were made, and to whom?
And why were the coffins all empty and closed except for one coffin only?
And why no coffin of them was found in it any mummy of the body of the calf Abyss as claimed by August Marit Pasha discoverer of the tomb?
How and why they were manufactured ?and why they are very large? and then in the end how they were transferred into the corridors and tunnels of the narrow Sarbium?
The Sarabium catacombs are themselves a difficult puzzle in the summer, you find it cool and in winter it's very hot ..
Tunnels length is 400 meters engraved in the heart of the rock Sakkara plateau and not the middle of the sand, and you can descend to the tunnel with a ladder and if you look at the tunnel map below you will find many divisions ..
In the main tunnel in those places shown on the map there are boxes and there are other divisions as well.
If we look at the main passage we will find that it was on one direct straightness, can this long tunnel be dug only by the shovels?
The tunnels of the Sarabium have only one door, which is considered the entrance and the exit. The vision inside the tunnels, even with the sun is very dark, did they dig all that distance in the dark?! and took a load of tons on the lights of the torches?!
It is very strange that there is no trace of the positions of the torches on the walls of the tunnel, and that any flares in that depth in the earth and these Tons of landfill will be hard and suffocating.

The tunnels are not engraved in the sand, but are engraved in the rocks of Saqqara, which certainly requires an unbelievable effort that can not be achieved. it can't be done through the human hand alone, but powerful and advanced machines completed this work, because if we look at our modern civilization, we will find that to dig a tunnel like this we will need a machine drilling tunnels ..

Then come to the coffins of the Sarabium itself, which is a scientific and engineering miracle even today, these coffins have not been built but carved like any coffin it has 4 sides and a base and a cover ..
The body of the coffin itself was carved by cutting a solid block of granite of various types of quarries located in the south of the country such as Luxor, Aswan, Sudan, Sinai, Red Sea and Fayoum.

After deducting the mass of about 80 tons of the quarry, they are drilled and polished, and then the cover is carved.
The coffins are made of high hardness rocks (red granite, black granite, basalt, chist, quartz), which can not be handled except by diamond cutters. Copper - bronze - and iron in later times) can not deal with these tools at all, as well as refined in this way ..

There is no doubt that the shovels and primitive road machines can not produce such a unique engineering product. All interior and exterior corners of the box are 90 degrees complete not 90.1 or 89.9.
Also the flattening coefficient of error is less than 0.02%, which can not be achieved in the modern era only using high-precision machines or visual optical technology such as laser to get the full flatness ..

Then we come to the most important question ..
How were these giant coffins placed inside the tunnel, which has one very narrow entrance?

It is worth mentioning that King Farouk tried to remove one of the coffins from the tunnel and used a lot of workers and mules and could not move it from its place only a few meters and then was left in place so far.

and now get the chance to see this strange place from inside through these photos

source

https://www.facebook.com/historical.glimpses/posts/1804450129650013