Important stuff : Split Rings. "The rings are different needs, different important ring..."
Split Rings is one of the most popular consumables in spinning baits and tackle. They are used in almost all the joints of the hook with a lure or weight.Even despite the emergence of portable jig weights, many anglers prefer the connection of the hook with the sinker through the winding ring. The reason? With a ring of the lure more freedom while animating.
In jig snap-ins with look-alikes when using clockwork rings in 100% of cases fit the classic, round ring...
If you apply the same offset in the snap-in hooks sometimes there is a problem. The size of the ear hooks, large rooms (5\0 or more) often allows you to connect a hook with a sinker. But ears small hooks are very small, and even if you manage to get there crown ring that warps and a snack. Such a connection will not perform its functions. The bait in the snap-in will warp and no proper game from this snap we will not see.
To sit with the wire cutters and cut off a piece of lay of each winding ring, to solve this problem, the more work (((. But there is a solution. A number of companies specifically for equipment offset hook with a small eye began to produce oval rings special design.
As you can see in the photo, they perfectly solve the problem of small ear avsenikov. Part of the ring,where a single wire, is held in such a small ear with no problems. And the part where it is double, will is on the side of the jig weight.
I use oval crown ring Pontoon21 Oval Ring and a Mustad Oval Split Rings.
Features oval Split Rings of a different design and purpose:
(C)
Such rings are not suitable for offset hook
There is another problem, which was developed by clockwork rings special designs and special materials. It hooks! How many expensive lures opens for the season fishing brethren - do not count. A huge number of. And if to jig the baits already formed an attitude, as an expendable (although they ain't cheap, if you count the kit rubber+hook), spinners and crankbaits today are very expensive, and lose them at the toe is very a pity...
When fishing from the boat we have quite good chances to save dear Wobbler with unhook. Came to the place hook, fishing line stretched vertically pulled off to the bait, a couple of simple manipulations - and the lure saved...
From the shore, especially at the toe in the far distance, all the more difficult. But there is a solution! It is the "extensor" Groovy rings on the hooks of baits and lures. They are made of elastic wire with addition of titanium. At the toe of the hook of the lure in a snag a ring with a certain force to bend the hook remains in the snag and the bait saved. Ring after my release from the hook, then takes the same form... Such rings are produced with different loads on the straightening, so that , knowing breaking nagruzku your cord , you have to choose a ring with several smaller load on the straightening to keep their losses to a minimum ( not to take the whole lure, but only the hook).
(C) table with explosive loads of rings on the link under the photo
These are the friends, interesting design finds to facilitate our fishing life))). Although it would seem that can be easier conventional wind-up ring? ))
I dont fish at all, but I love learning about how things works. Your post really explains things and its enlighting. Great post.
Congratulations! This post has been upvoted from the communal account, @minnowsupport, by spinner from the Minnow Support Project. It's a witness project run by aggroed, ausbitbank, teamsteem, theprophet0, someguy123, neoxian, followbtcnews/crimsonclad, and netuoso. The goal is to help Steemit grow by supporting Minnows and creating a social network. Please find us in the Peace, Abundance, and Liberty Network (PALnet) Discord Channel. It's a completely public and open space to all members of the Steemit community who voluntarily choose to be there.