Willkommen im Internet.. // Welcome to the internet.. [Deutsch & English]

in #smartphonephotography6 years ago (edited)

92321533666553076.jpg

GIF-180809_191831.gif

Where's my tree?


Der Telekom-Techniker war da

Und hat auch gleich alles freigeschalten.

Nun musst du nur noch die Fritzbox einrichten...

Dann funktioniert schonmal Internet und Telefon. Vermutlich. Also, bestimmt..

The Telekom-technician was here

He unlocked everything.

Now you only have to set up the Fritzbox...

Telephone and internet connection should work fine after that.
Probably. Presumably. Well, surely...


Laminat verlegen leicht gemacht

Es gibt tatsächlich ein paar Dinge zu beachten wenn man Laminat verlegt.

  1. Der Untergrund sollte sauber und staubfrei sein.
    hier zahlt sich gutes Abkleben, Abdecken aus.

    wenn man es denn tut...
    ansonsten heißt es Farbkleckse vom Boden kratzen. Staubsaugen und leicht feuchtes wischen ist definitiv sinnvoll.

  2. Dampfsperre auslegen. Das ist, je nach Raumgeometrie etwas fummelig 2cm sollten an den Wänden nach oben stehen, eine Überlappung von Folie sollte etwa 20cm betragen.

  3. "Trocken auslegen". Bevor die ersten Dielen gesägt werden, sollte zumindest die Raumbreite komplett einmal ausgelegt werden.
    So sieht man, ob die Dielen gerade sind, wie die Dielen aufgehen und ob die erste Reihe vorab bereits gekürzt werden sollte.
    Wenn am Ende des Raumes auf einmal ein Spalt von 2cm ist wird es ein ziemliches gestöpsel dort einen vernünftigen Abschluss hinzubekommen.
  4. Auslegen, Messen, Schneiden, wiederholen...

Laying laminate made easy

There are actually a few things to keep in mind when laying laminate.

  1. The surface should be clean and dust-free.
    here good masking, covering pays off.

    if you do it ...
    otherwise it's like scratching off the floor. Vacuuming and slightly damp wiping definitely makes sense.

  2. Lay out the vapor barrier. This is, depending on the geometry of the room a bit fiddly. 2cm should be up on the walls, an overlap of foil should be about 20cm.

  3. "lay dry". Before the first planks are sawn, at least the width of the room should be completely laid out.
    So you can see if the floorboards are straight, how the planks rise and if the first row should already be shortened in advance.
    If there is a gap of 2cm at the end of the room, it will be quite a stopper there to get a decent finish.
  4. Lay out, measure, cut, repeat ...

fiddling.jpg

ein ziemliches Gestöpsel

pretty fiddling


3 fertig 2 weitere noch zu tun

Drei Räume haben wir tatsächlich am Wochenende geschafft zu verlegen. Zwei weitere fehlen noch.

Dafür hast du nun einen schönen Muskelkater von den ganzen Kniebeugen :P

Bis zum nächsten Mal
Euer Grumpyhouse

3 finished 2 more still to do

We actually managed to relocate three rooms on the weekend. Two more are still missing.

But now you have a nice sore muscle from all the squats :P

See you next time
Your grumpyhouse




Disclaimer:

Alle Bilder sind von mir oder
zur freien Verfügung markiert worden
Letztere versehe ich immer mit einem Link zur Quelle

All pictures are taken/done by me or are marked as free to use by the creator
I always provide a source link to them if that's the case



Sort:  

Cool gemacht, als alter Klempner war Laminat verlegen noch nie mein Ding. LG " Floki"

Hab das selbst auch noch nie gemacht. Hat aber dafür ganz gut funktioniert. Dass die Trittschalldämmung bereits unten an den Dielen klebt ist definitiv eine Erleichterung.

Ist aber im großen und ganzen auch für Laien kein Problem.

Congratulations @matschi! You have completed the following achievement on Steemit and have been rewarded with new badge(s) :

Award for the number of upvotes

Click on the badge to view your Board of Honor.
If you no longer want to receive notifications, reply to this comment with the word STOP

Do you like SteemitBoard's project? Then Vote for its witness and get one more award!

Coin Marketplace

STEEM 0.18
TRX 0.13
JST 0.028
BTC 57291.92
ETH 3066.72
USDT 1.00
SBD 2.36