How to install front brake shoes

Assalamu'alaikum wr. wb.

How are you all steemians.....?
Hopefully fine also...

How to replace disc brakes shoes ... If indeed shoes brake discs are already really exhausted indeed should immediately be replaced ... To replace the shoes own disc brakes fairly easily and quickly ... Some tools that must be prepared to replace disc brakes shoes: size 12 spanner, screwdriver, pliers, and minus the grease (FAT) if needed .

First, loose caliper brake (muzzle pigs) to be replaced use (usually) 12 spanner for front brake ... But there is also a motorcycle that like other bolts bolt L or star ... Adjust, but stay on the motorcycle most use bolt-sized 12 .

Step two, off the old brake shoes are already worn out/exhausted ... The brake shoes are usually associated with a long iron and small ... Just pengaitnya off and unplug the iron, it will be easily detached brake shoes ... Don't forget to clean the brake caliper area because of course plentiful Street dust dust that clings to ... Considering its location near the wheels will often dirty ... If it is cleared don't forget to lubricate again part parts that need to be lubricated using the grea.

Third, if the piston breaker is too close then it can be by way of by using a minus screwdriver ... For information about how can put back the old brake shoes and congkel by using a screwdriver ... If it is wide enough to be paired with the new brake shoes then her new brake shoes pair stay.

The last step, if everything is going wrong Live plug back to its original position the brake caliper ... Don't forget before really paired back checks everything including brake shoes clamp onto the caliper ... Do not be until there is a terisisa and forgot the part were installed ... If already in check and it's all clear then plug it back in it with a wrench size 12 last ... Finished.

Thank you . . . Hopefully helpful.....!