For those of you who like miniature, can in one manifest by making works - works that use very simple raw materials. On this occasion I @jhonmaks will give a Tutorial to make a Work that is "Miniature Bicycle Ontel", Follow her steps.

IMPORTANT THING :

In the manufacture of ontel bicycle crafts do not require special tools, because the tools that are used are tools that are very simple and easy to get around our homes. The tools and materials in this paper, which I show only as examples. So that readers who want to create can be adjusted with the tools that readers have at home.

TOOLS:

In the manufacture of ontel bicycle crafts do not require special tools, because the tools that are used are tools that are very simple and easy to get around our homes. The tools and materials in this paper, which I show only as examples. So that readers who want to create can be adjusted with the tools that readers have at home.

• Ruler.

The ruler is used to measure the length and diameter of the bamboo as needed.

• Scissor.

Scissors are used to cut bamboo that has been split and already in the puree.

• Kitchen knife.

Kitchen knife serves to split the bamboo that will be used in the manufacture of bicycle craft ontel.

• Cutter.

Cutter knife serves to smooth and tidy the bamboo that will be used as a craft material.

• Chainsaws.

Saws are used for cutting bamboo which is still round.

• Screwdriver Glasses.

Screwdriver glasses are examples of simple tools that exist in the house that serves to make a hole in the bamboo manually, because usually the tip of the screwdriver is small.

• Pencils and Erasers.

Pencils are used to make marks and sketches on the bamboo we want to make before being cut.

The eraser is used to remove misleading marks or sketches that are not in use.

INGREDIENTS:

The basic ingredients used in the manufacture of ontel bikes are bamboo that is cut and then cut in the puree. While in the assembly in the use of wood glue as adhesive, wood glue that is in use was easy to get in material stores that sell building materials.

• Wood glue.

The wooden glue that is used in the manufacture of bamboo ontel bikes is a wooden glue that is sold in many material stores that sell building materials.

• Bamboo.

Bamboo used in the manufacture of this ontel bicycle craft can use all kinds of bamboo with various sizes in accordance with our needs and needs.

• Varnish and Spray Paint.

Non CFC lacquer and spray paint is a material that is used not only to make the ontel bike craft more attractive but also to make it durable and durable.

Paint and varnish spray is a kind of paint and varnish that is ready to use without having to mix with the liquid solvent first. So that can be directly in use.

STEPS

• Before making a miniature bicycle craft ontel that we need to prepare is the tools and materials that will be needed to make a mini set ontel bikes sebagaiman been in paparkan above.

• In making mini handycraft bike ontel bike set can use all kinds of bamboo with various sizes. This is in accordance with the concept of small size miniature aka made.

• Choose bamboo that is old, straight and dry, to be durable and durable.

• After choosing the bamboo to be used, bamboo split into 8 parts.

• Next cut bamboo books because bamboo books are usually textured hard and less good in ontel bikes.

• After the books are cut, the bamboo is cut into 3-4 mm2.

• Then bamboo in puree by using a cutter knife up to 3-4 mm in diameter.

• One of the smoothing functions is that bamboo is not sharp and for bamboo more tidy.

• After the bamboo in the puree then can be made one by one miniature component of his ontel bike.

• Make a bicycle wheel.

Choose bamboo diameter as needed with a circular diameter surface, so that the miniature bike wheels are made evenly in diameter.

• Make miniature bicycle wheels ontel bike.

Split the bamboo diameter of 2 mm in length to adjust the width of the wheel diameter so that the bars are made balanced with the wheels.

• Attach the wheel bars.

After the bamboo in the split is made 2 mm in diameter with a length adjusted to the diameter of the wheel, then the grating in pairs on the miniature bicycle wheels are embedded using liquid wood glue to taste.

• Make a steering wheel.

Split the bamboo with a thickness of 3 mm x 5 mm, then shape like a steering wheel with a cutter knife.

Then steering wheel in the bottom with a screwdriver glasses as a place to seat the steering wheel of a bicycle.

• Make a bicycle saddle.

Split the bamboo with a thickness of 3 mm x 5 mm, then shape resembles a bicycle sadal by using a cutter knife.

After the sadal is formed, hole the bottom surface of a sadal by using a 2 mm diameter glass screwdriver.

• Make a bike pedal.

With a cutter knife make a circle from the bamboo hemispheres 1.5mm thick with a width of 2.5cm to be used as a gear bicycle pedal.

Also install pedal pedal that is glued using liquid wooden glue.

• Make a bike frame.

To make the bike frame, used bamboo is already in the split and already in the puree with a diameter of 3mm.

Then the bamboo in the cut in length adjusted to the miniature frame size of the bike to be made.

After that, then on the raft of the bicycle with the rekatkan use the glue of liquid wood on the end of the bamboo that would be made according to sketches miniature bike frame. Compiled one by one bike frame that would be made with glue liquid wood as adhesive. To form the desired frame.

Hole on the front of the bicycle frame with a glass screwdriver with a diameter of 2 mm, as a steering wheel handlebars. Once the frame is formed, the next step is to perforate the bottom of the bike with a glass screwdriver, as a place to row a bicycle.

• Make a standard bike.

To assemble the first bike standard is done is cut bamboo that has been split 2.5mm diameter that has been in the puree.

Then arrange into a standard bike in the desired way with the glue to use glue liquid wood.

• Make a bike rack.

Choose bamboo that has been split 2.5mm in diameter, then cut to the size of the puppets to be made.

Glue the pieces together to form the desired piece by using wood glue.

• Make a handlebar.

To make the bamboo bicycle stir handlebars are in need is the same as the bamboo used for the bike frame that is already in the split diameter 2.5-3 mm.

Then the bamboo is cut to the size required for the manufacture of wheel handlebars.

After the new cut in the bundle by glued using a glue of liquid wood.

Once in gluing lubagi the bottom of the steering wheel handlebars with a 2 mm glass screwdriver to place the bicycle axle.

ASSEMBLE

In the assembly process of bicycle miniature components, the assembly order can be done from any component according to who want to raft first. The authors describe in this paper only as an example only.

• Assembling a pillion.

Raft bike racks that have been coupled by way of gluing on the back of the bike frame using glue adhesive.

• Wheel assembly.

Attach the front wheel on the lower wheel handlebars with the input of the axle hole.

Attach the rear wheel on the wheel holder in the rear frame of the bike by means of the axle input on the bike axle hole.

• Steering assembly.

After the front wheel mounted on the wheel handlebars then the handlebars can be installed on the front bike frame by way of input as handlebars on the hole handlebars on the front of the bike.

Attach the steering wheel on the steering wheel handlebar that has been mounted on the bike frame and then glued using a liquid wooden glue.

• Assembling slippers.

Attach the saddle to the bike frame and glue it with wood glue.

• Pedaling assembly.

In the installation of paddlers that blend with the gear, in pairs to the right of the frame by way of menymasukan pengayuh ash in the paver as found on the frame of the bike and then install the other one from the left side that is attached with wood glue.

• Standard assembly.

Place the standard on the bottom of the rear axle of the bike by gluing it using a wood glue.

FINISHING

Finishing is the process of giving color or varnish on the result of mini craft arranged in the intention to beautify the work itself is also intended to make durable crafts are made.

In staining or mini-varnisper bike set or any holder can use non-CFC paint and varnish spray and environmentally friendly. This is done to reduce air pollution also take care of the ozone layer in the earth's sky layer.

Miniature ontel bikes that have been made can be directly installed without a cradle as home interior decoration.

Or it could also be given a holder of a wooden beam or fiber with a variety of colors as desired.