Creative thinking transforms rubbish into masterpieces

in #handycrafts7 years ago

Do you know how long it takes nature to decompose the remaining waste of soft drink cans, which we throw away on the surface of this earth ????????? hmmmm, maybe throughout our ages not necessarily that the garbage can decompose perfect, it's just one garbage, not imagine with other types of garbage.

In this post I want to share a little something I've made, hopefully can be useful, at least slightly reduce environmental pollution, by recycling the garbage cans used softdrink, into handicrafts, mini vespa, with tools and materials very easy to get and the most important thing we can appreciate our creativity and imagination, this can hone the development of gross motor and fine nerve of our muscles, okay, immediately wrote yes!

Materials Required To Create Miniature Vespa.

  • Used Cans.
  • Bottle Caps.
  • Foam.
  • Aluminum Wire / Wire.
  • Isolated Black.

Tools Needed To Create Miniature Vespa.

  • Pliers.
  • Carter knives.
  • Scissor.
  • Ruler.
  • Lem Shoot.
  • Sandpaper.

3.png

Steps for Making a Vespa Miniature.

  • The first step is to cut the used tin into 2 parts. The first part is the edge of the can and the second part is the top and bottom of the calendar (which is round).

2.png

2-1.png

  • For round pieces of cans, please trim the edges to look neat. Then measure and scissor become shaped like this.

2-2.png

  • For cans that are edges, please cut rectangle. Then give solatip at the edges. Just like the following example.

2-3.png

  • The next step is to unite between the pieces at number 2 and the pieces at number 3 above to be the back of the vespa. Like the following picture.

2-4.png

2-5.png

  • After the back of the vespa is formed, then proceed to make the front of the vespa. The way of manufacture is also the same as the back earlier. But it's just that the size is more scaled down. Like this

2-6.png

  • If the back and front of the finished, now it is time for the merger so that the form of the vespa intact. To combine between the front and back of the vespa, please cut the tin into a rectangle with size adjust to the rear shape you created earlier.

2-7.png

  • After unifying the back of the vespa with the can, form into a vespa body using a ruler. Here's how

3-1.png

3-2.png

  • Next is to combine the front of the vespa that was made earlier so that it becomes a miniature vespa intact.

3-3.png

  • Make vespa frame to be strong, cut the aluminum wire and shape according to the vespa skeleton as shown below.

3-4.png

  • Then also make the vespa handlebar by using the wire, its shape is more or less like this.

3-5.png

  • Then put two wires for frame and wire for handlebar. To put it together, you can wrap it using a piece of tin and then put a glue on it.

3-6.png

  • After the wire frame and handlebar put together, now please put in body vespa then give glue yes.

3-7.png

  • Next, create a vespa seat. To make it, you can use the top of a can with a lid. Please cut it into something like this.

3-8.png

  • Next make vespa tires. The material uses a bottle cap, for how to please combine 2 bottle caps into a tire. So for the front tire and rear tire vespa you need 4 bottle caps. Then hose and give aluminum wire. so it looks like this.

3-9.png

  • Next step, install the vespa tires at the bottom of the vespa. Use glue to paste it. For the vespa seat please plug it in too.

3-10.png

3-17.png

  • Last is to make a vespa lamp. The way is easy enough. You simply cut the cork into a round, then coat it with a tin so it becomes round like a real vespa lamp. Then glue on the front of the vespa. Here's the picture

3-16.png

Finally, a miniature vespa from a used can is already finished. How, easy to open ..? Thus the discussion How to Make a Miniature Vespa Of Used Cans that we can convey, may be useful.

Coin Marketplace

STEEM 0.24
TRX 0.22
JST 0.037
BTC 98508.22
ETH 3434.59
USDT 1.00
SBD 3.35