Mediator made of wood and resin by own hands

 Saw a piece of wood, which was intended for the ring \ pendant or earrings. 

 But it will be possible to make as many as two mediators! The idea in the mediator was to snow and stand a tree. That's why I started with the tree planting. 

 Seal it in a box to keep it going. We plentifully water the tree with a blue two-component epoxy vodichka, preliminarily hosing in it a white powder. 

 We need to cut something like a mediator from it. Therefore, we plan something similar and saw off with a few crooked hands and an eternally breaking file. 

 Further sawing  is already scary, so slowly on the stencil we grind everything by hand,  previously before bringing the workpiece to the desired thickness and  polishing. First on the coarse skin, then on the  less coarse, then even less, and then even less, and even less, and then  on jeans with polishing paste. But you can see further that all my skins are smeared with something. And this is what? This oil, right. 

 The file steplinenko beautifully grinds the working surface to a thickness of 1 mm, so, well, not a thick mediator. 

 And it turns out we have such a mediator. 

Source: http://pikabu.ru/story/mediator_iz_dereva_i_smolyi_2_4930940