Easy steps to fixing a plug for a stabilizer

Firstly what is a plug:
It is a pronged connecting device which fits into a mating socket.

First step:
The bolts in the plug are screwed out with the use of a screw driver for easy access, the plug has four tiny bolts screwed to it, and it needs to be screwed out, to enable you have access to its skeletal part. First images below.

Second step:
I used pliers, to give the wires of the stabilizer a
curved mouth, the reason for this is for the
wires to pass through the holes of the plugs
easily, image below.

Third step:
The wires of the stabilizers which consists of two, are fixed in the plug and are tightened with the help of a screw driver.
It has to be tightened to prevent a bridge between the two wires. Images below.

Fourth step:
The skeletal opening has to be covered, and screwed properly well, the reason for this is to prevent one from getting in contact with naked wires, as it could be dangerous, image below.

Fifth step:
The finished product: